|
|
|
Machining Travels:
X x Y x Z (in) |
11.8 x 7.8 x 7.8
|
Maximum Workpiece Size:
w x d x H (in) |
23.2 x 14.2 x 7.5
|
Maximum Electrode Travel (in)
|
13.6 |
Power Supply
|
30 AMPs
|
| |
FULL PRODUCT SPECIFICATIONS
|
|
| |
High-Speed EDM DRILL WITH LOW ENERGY CONSUMPTION |
|
- Newly developed low-energy consumption-type generator provides high-speed operation with extremely
low wear.
- This unique power supply allows stable machining at the break through point reducing over all time
while providing a good quality hole.
- Average time from break through to finished hole is mere seconds vs. other systems that take as
much as 2 minutes or more to push the bullet nose through to finish size.
- This 2 inch D2 example shows a 2:1 ratio in burn speed. The ED-2000M made 12 holes vs. not quite 6
for the competition.
- A contact stop plate is located below the workpiece to detect when the electrode is completely
through the part. No "guess work" determining if the electrode is far enough through to finish the
hole.
- Extremely easy operation - New Touch-Screen Control.
|
|
|
ED-2000M 
