| ED-2000NC EDM Drill Specifications |
|
Inch |
Metric |
| Machining Range X-Y-Z |
11.8 x 7.8 x 7.8 |
300 x 200 x 200 |
| W-Axis Servo Travel (electrode travel) |
13.6 |
345 |
| Max. Servo W-Axis Feed Rate |
31.5"/min |
800 mm/min |
| C-Axis Rotation Speed (electrode rotation) |
0 ~ 800 RPM |
| Z-Axis Rapid Speed |
39.3"/min
|
1000mm/min |
| Electrode Diameter Range |
.012 ~ .120 |
0.3 ~ 3.0 |
| Max. Workpiece Dimensions |
23.2 x 14.2 x 7.5 |
590 x 360 x 190 |
| Max. Workpiece Weight |
330 lb. |
150 kg |
| Table Dimensions W-D |
13.7 x 9.8 |
350 x 250 |
| Max. Electrode Length |
16 |
400 |
| Fluid Capacity |
5 gal. / 1 Paper
|
19 L19 L / 1 Paper |
| Dielectric Cooling |
Fan Cooler Standard |
| Machine System Dimensions W x D |
39.0 x 42.2
|
990 x 1072 |
| Machine Installed Height |
72.8 |
1850 |
| Machine System Weight |
1100 lb. |
500 kg |
| Control Operation |
Push Botton Touch Screen |
| Power Supply Peak Current |
30 AMPs |
| Power Requirements [KVA] |
200/220 VAC ±5% [2.5] |
| Additional Features |
|
| Full Color Touch-Screen Control provides simple operation (8-Axes Capable) |
|
| Internal Fluid System with filter and fan cooler standard |
|
| New Low-Energy consumption-type generator provides high-speed operation with extremely low electrode wear |
 |
| Patented low-voltage power supply produces no "bullet nosing" of the electrode providing cleaner hole break throughs |
| Burn a 1.0 mm electrode though 2" thick D2 in 70 seconds |
| Burn over 14 holes through 2" D2 with one electrode |
| The control uses linear scale feedback on the X-Y axes |
| Optional Tilt / Rotary Indexing Table increases productivity in multi-angle hole applications |
| Electrode chuck ranging from 0.3 ~ 3.0 mm diameter standard |
| Full 1-yr. Warranty with Triple Diamond Partnership Program |
|
