|
|
|
| FA-20VS Wire EDM Specifications |
| |
Inch |
Metric |
| Max. Submerged Workpiece Dimensions |
41.3 x 31.5 x 17.6 |
1050 x 800 x 445 |
| Max. Submerged Workpiece Weight |
3300 lb. |
1500 kg |
| Table Dimensions |
30.7 x 24.8 |
780 x 630 |
| Machining Range X-Y |
19.7 x 13.8 |
500 x 350 |
| Max. Z-Axis Height |
17.7 |
450 |
| U-V Axis Travel (from center) |
±3.0 |
±75 |
| Taper Angle @ Thickness |
15 deg.@ 10.5 |
15 deg.@ 265 |
| Wide Angle Taper (Optional Guides Required) |
45 deg. @ 2.4" (No AT Possible) |
| Minimum Drive Unit / Resolution |
0.00001 / 2 millionths |
0.0001 / 0.05µm |
| User Program Storage [Hard Disk Size] |
1 GB [20 GB] |
| Table Rapid Feed Speed |
51.2 "/min |
1300 mm/min |
| Wire Diameter Possible |
0.004~0.014 |
0.1~0.36 |
| Minimum Start Hole Diameter |
0.02 |
0.5 |
| Max. Wire Spool size STD [optional] |
22 lb. [44 lb.] |
10 kg [20 kg] |
| Filters / Type |
2 / Paper |
2 / Paper |
| Filter Tank Capacity |
290 gal |
1100 L |
| Machine System Dimensions |
118.1 x 112.2 |
3000 x 2850 |
| Machine Installed Height |
90.6 |
2300 |
| Machine System Weight |
9347 lb |
4240 kg |
| Power Requirements [KVA] |
200-230V [13.5] Built in AVR |
| Compressed Air Requirements |
2.7 cu.ft./min. @ 71~100 psi |
| Additional Features |
|
| V500 Ultra High-Speed Power Supply |
 |
| World's Fastest Machining Speed 47 sq"/hr. (using .014" "V" type wire) |
| Speed Improvements, Up To 80% In PCD and CBN Materials |
| PF Circuit Provides as low as a 6.0µin Ra Surface Finish |
| Submerged Machining to 17.6" Deep |
| Automatic Fluid Level Control |
| Automativ Vertical Machine Tank door |
| Full 4-Sided Work Table |
| Fine Grain "Dianite" Casting Material |
| Fixed Table Column Movement Design |
| Windows XP Operating System |
| PM5 Power Master Control Improves Poor Flush Machining up to 50% |
| DC-Servo (Closed Loop) Torque Control Wire Tensioning System |
| Direct Drive Zero Backlash Ball Screw Couplings |
| Linear Motion Guide Ways |
| Digital 500 Watt AC Servo Drive System |
| All-Axes Absolute Control System |
| Linear Glass Scale Feedback (X-Y Axes) |
| Optical Rotary Encoder Feedback (U-V-Z-Axes) |
| Auto-Threading with Scrap Wire Processor (Chopper) |
| Inverter Controlled 16-Step Programmable Flushing |
| Full Time AE (Anti-Electrolysis) Power Supply Protection |
| Dielectric Fluid Chiller Standard |
| Full 2-yr. Warranty with Triple Diamond Partnership Program |
| Auto-Oiler Lubrication System |
|
|
|
| |
|
SAVE THOUSANDS WITH A
TRIPLE DIAMOND PREVENTATIVE
MAINTENANCE CONTRACT
LEARN MORE >>
|
|
| |
|
|
Wire EDM 
